Comportamiento microestructural y al desgaste abrasivo de la aleación Moldmax HH (C17200) sometida a ciclos térmicos
Palabras clave:
Comportamiento microestructural, ciclos térmicosSinopsis
Respecto a los materiales de ingeniería, las aleaciones base hierro son las más utilizadas en aplicaciones que involucren condiciones de desgaste abrasivo, (por ejemplo: los aceros para herramienta tipo D, los aceros austeníticos al manganeso y las fundiciones aleadas al alto cromo). En cuanto a las aleaciones no ferrosas, sobresalen las aleaciones base cobre, (por ejemplo, los latones [Cu?Zn], bronces [Cu?Sn] y aleaciones Cu-Be). Sin embargo, para el caso de los latones y bronces, su aplicación se ve limitada debido a su microestructura porque tienden a presentar un comportamiento monofásico, así mismo, su resistencia mecánica dependerá del tamaño de grano y del grado de solubilidad de los elementos de aleación. Por otro lado, las aleaciones cobre-berilio presentan un comportamiento termodinámico más complejo, lo cual permitiría obtener microestructuras eutectoides similares a la de los aceros. Adicionalmente, este tipo de aleaciones permitirían la aplicación de tratamientos térmicos de envejecido, favoreciendo los fenómenos de precipitación de compuestos de segunda fase e incrementando su resistencia mecánica.
Descargas
Citas
S. Hernández et al., “Influence of temperature on abrasive wear of boron steel and hot forming tool steels”, Wear, vol. 338-339, pp. 27-35, sep. 2015.
J.C. Gutiérrez et al., “Evaluación de la resistencia al desgaste abrasivo en recubrimientos duros para aplicaciones en la industria minera”, Scientia et Technica, vol. 2, no. 25, pp. 149-154, ago. 2004.
M.F. Yan, et al., “Microstructure and mechanical properties of copper–titanium–nitrogen multiphase layers produced by a duplex treatment on C17200 copper–beryllium alloy”, Materials and Design, vol. 84, pp. 10-17, nov. 2015.
K.X. Zhou, et al., “Precipitation behavior and properties of aged Cu- 0.23Be- 0.84Co alloy”, Journal of Alloys and Compounds, vol. 658, pp. 920-930, feb. 2016.
X. Guoliang, et al., “The precipitation behavior and strengthening of a Cu–2.0 wt% Be alloy”, Materials Science and Engineering: A, vol. 558, pp. 326-330, dic. 2012.
Z.W. Zhong, M.H. Leong y X.D. Liu, “The wear rates and performance of three mold insert materials”, Materials and Design, vol. 32, no. 2, pp. 643-648, feb. 2011.
L. Yagmur, “Effect of microstructure on internal friction and Young’s modulus of aged Cu–Be alloy”, Materials Science and Engineering: A, vol. 523, pp. 65-69, oct. 2009.
R. Monzen et al., “Watanabe Bend formability and strength of Cu–Be–Co alloys”, J. Mater. Sci, vol 46, no. 12, pp. 4284-4289, ene. 2011.
Y. Tang et al., “The effect of aging process on the microstructure and mechanical properties of a Cu–Be–Co–Ni alloy”, Materials & Design, vol. 85, pp. 332-341, nov. 2017.
W.F. Smith, Fundamentos de la ciencia e ingeniería de materiales. España: Editorial McGraw-Hill, 1998.
R. Nunes et al. ASM Handbook: Volume 2 Properties and Selection: Nonferrous Alloys and Special - Purpose Materials, Décima edición, ASM International, 1992.
T. Arai et al. ASM HandBook: Volume 4 Heat Treating, Décima edición, ASM International, 1991.
B. Adams et al. ASM HandBook: Volume 9 Metallography and Microstructures, Novena edición, ASM International, 2004.
A. Anderson et al. ASM Handbook: Volume 18 Friction, Lubrication, and Wear Technology, Décima edición, ASM International, 1992.
ASTM G40-15, Standard Terminology Relating to Wear and Erosion, ASTM International, West Conshohocken, PA, 2015.
ASTM G65-00, Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus, ASTM International, West Conshohocken, PA, 2003.
G. Straffelini et al., “Dry sliding wear of Cu–Be alloys”, Wear,, vol. 523, pp. 65-69, ene. 2005.
ASTM E3-01, Standard Practice for Preparation of Metallographic Specimens, ASTM International, West Conshohocken, PA, 2003.
ASTM E140-07, Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hard ness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness, ASTM International, West Conshohocken, PA, 2007.
ASTM E384-11, Standard Test Method for Knoop and Vickers Hardness of Materials, ASTM International, West Conshohocken, PA, 2011.
D. Mesa, O.F. Higuera y E. Ariza, Fundamentos de tribología, Colombia, Pereira: Universidad Tecnológica de Pereira, 2017.
L. Yagmur, O. Duygulu y B. Aydemir, “Investigation of metastable ?? precipitate using HRTEM in aged Cu–Be alloy”, Materials Science and Engineering: A , vol. 528, pp. 4147 – 4151, may. 2011.
Kizilaslan e I. Altinsoy, “The mechanism of two-step increases in hardness of recipitation hardened CuCoNiBe alloys and characterization of precipitates”, Journal of Alloys and Compounds, vol. 701, p. 116 – 121, abr. 2017.
UDDEHOLMS AB, MOLDMAX HH, Ficha técnica, 2018. [En línea], Disponible en: https://www.asteco.com.co/images/imagenes/productos/aceros/acerosparamoldes/fichastecnicas/Ficha-Tecnica-Moldmax-HH.pdf.